Training Courses for
✔ IECEx Recognised Training Provider
✔ Trusted by 86% of all IECEx Certified Service Centres in the UK, Middle East and South-east Asia.
✔ Covering the BS EN and IEC 60079 standard series.
✔ ATEX, BS, EN, UL, FM
✔ IEC BS EN 60079-19: The Repair Overhaul and Reclamation of Hazardous Area Equipment
Who should attend?
It is important for a manager or supervisor
to attend the courses so that they become the “Responsible Person” able to fully understand and take responsibility for ex repairs. All other staff refurbishing Ex explosion protected apparatus should also be trained.
The aims of the course are to give delegates a thorough knowledge of how the different protection concepts and standards should be used when overhauling, repairing, or reclaiming Ex equipment suitable for each zoned area.
Who Should Attend?It is important for a manager or supervisor to attend the courses so that they become the “Responsible Person” able to fully understand and take responsibility for ex repairs. All other staff refurbishing Ex explosion protected apparatus should also be trained. It is recommended that a minimum of two electrical or mechanical engineers/technicians should attend the courses per company. This may also include maintenance staff looking after Ex motors, generators, pumps, fans, gearboxes, valves, and instrumentation, or involved in the replacement of spare parts such as bearings The courses are also recommended for administration, sales, and stores staff requiring a knowledge of equipment suitability for zoned areas.
Do you cover the installation, maintenance and inspection of Ex Equipment?"We specialise on Units Ex 005 of the IECEx Recognised Training Provider Programme (RTPP). This focuses on the IEC BS EN 60079-19 standard on repair, overhaul and reclamation of Ex equipment. We do, however, offer a Module 5 covering aspects of IEC BS EN 60079 parts 14 and 17 on the removal, installation, maintenance and inspection of Ex equipment for service centres. This is not a CompEx course.
Do you offer on site training?Yes! We can offer on site training under special circumstances. Before considering this option - it is often difficult for company's to ensure all engineers are free for a 4 day onsite course. Often it is easier to send your your engineers in batches to our scheduled dates. If you would like to speak to us about onsite training, please contact us on firstname.lastname@example.org.
Do you certify engineers as 'competent' after the completing the course?Competence comes from experience built up in the workplace under the supervision of a 'Responsible Person'. The course gives delegates an understanding of the technical standards and documentation required to complete the repair, overhaul or reclamation of hazardous area equipment. Delegates will receive a Certificate of Assessment when completeing the course, or a Certificate of Attendance for attending the course, but have not passed the assessments.
How do I become certified as a competent repairer?The IECEx recognise both Individuals and Companies as certified competent. To become one or the other, please see our guide in the blog.
What is included in the cost of the course?We include: Coursenotes reference book Ex labels and reference data booklet USB key containg Excel Repair Sheets, Competency Work Log, and other supporting documents Lunch, Coffee and Refreshements AEMT Notepad, pens and holdall AEMT Yearbook and Journal Certificate on completion What we don't include: Accommodation, travel costs and expenses Ongoing support, unless you are a member of the AEMT A guarantee of passing the assessments
Who have we trained?
We have successfully trained over 86% of all IECEx Service centres in the UK, Middle East and South East Asia. They can all be found on the AEMT Ex Register.
The Ex Register is a prestigious list of service centres who have met a set of criteria in order to carry out Ex repairs competently.
AEMT's Ex Training courses were shortlisted as a finalist in the Contribution to Skills & Training category at the Pump Industry Awards.
Covers windings, insulation, terminal clearances, and electrical tests that are covered by BS EN IEC 60079-19:2019
& BS EN IEC 60034-23:2019
Covers identification of flamepaths, maximum permissible gaps, understanding volumes and acceptable reclamation techniques on Ex equipment covered in BS EN IEC 60079-19:2019
ATEX, UL, FM
Touches on all Ex protection concepts, including: Ex d, Ex e,
Ex nA, Ex tD, Ex p. Also touching on UL & FM equipment.
The course is recognised by the IECEx as part of their RTP programme and covers units Ex 005.
All delegates recieve a certificate on completion of the course.